Singxer SDA-2 DAC NOSネイティブデコーディングDSD512、AK4497デコーダヘッドフォンアンプ

カスタマーレビューを書く
利用でき: 在庫
価格: ¥66,700 ¥66,700
バージョン
ほしい物に追加

安心安全な取引について

  • PayPal
  • Mastercard
  • Visa
  • American Express
  • Apple Pay

There are two versions of SDA-2, the standard version and the advanced version. The other parts of the two versions are the same. The high version is especially suitable for USB-based users. It is recommended to use USB-based users.

The SDA-2 decoder is a high-performance HiFi-class audio decoding amp preamplifier. It uses XMOS's latest xCORE-200 series chip as the USB Audio solution, and uses the AKM497 of the AKM third-generation DAC as the DA conversion chip, AK4118 as a digital audio input receiver chip, uses STM32 as the control of the whole machine, Xilinx's large-scale FPGA as the processing of the clock system and digital audio stream. The amp part adopts 4-way full balance design, independent discrete class A amp drive circuit; the front stage output adopts analog pre-stage design, which is not the way of digital attenuation affecting sound dynamics; has rich input and output interfaces, including standard USB2 .0 input interface, SPDIF coaxial and AES balanced input, analog XLR balanced output, analog RCA output.

PCM supports up to 384Khz, DSD uses native direct solution technology, supports up to DSD512, and all interfaces support DSD decoding.

The DAC chip adopts AKM's flagship DAC AK4497EQ; the DSD adopts the native direct solution mode. The DSD digital stream does not pass through the internal digital filter and modulator, and works in the NOS mode. The PCM can also choose to work in the NOS mode, which is in line with the HQPlayer design concept. .

SDA-2 is the first decoding amp preamp product we developed, mainly using the following four main technologies:

 1, USB part uses our first generation isolation technology: SCIT technology (Singxer capacitor isolation technique), SCIT technology is a full isolation technology (ground isolation), high-speed signal using 150Mbps isolation chip, low-speed signal using optocoupler isolation It can completely isolate the interference from the PC; the USB version of the high version can basically reach the level of the SU-1 independent digital interface.

 2, source synchronization technology and FPGA shaping technology, re-shaping the isolated I2S signal; thus eliminating the additive jitter caused by the isolation chip;

 3, The self-developed clock system uses a femtosecond crystal oscillator as the local reference clock;

 4, 4 way class A discrete amp circuit, full balanced amplification of 8 chip transistors per route. 



Technical indicators:
Sample rate supported by each input interface:
PCM: 44.1KHz,48KHz,88.2KHz,96KHz,176.4KHz,192KHz,352.8KHz,384KHz

DSD: 2.8 MHz (DSD64) - DoP,native
5.6 MHz (DSD128) - DoP,native
11.2 MHz (DSD256) - DoP,native
22.5792 MHz (DSD512) - native
Bit width: Up to 32 bit over I2S output
                Up to 24 bit over S/PDIF

Electrical standards for each interface:
1, USB input socket is a standard USB-B type female socket, USB power supply range is 4.5V-5.1V;
2, SPDIF interface input standard S / PDIF signal, input impedance is 75 ohms, AES input impedance is 110 ohms;
3, the power input is 115V/ 230V AC, and the internal 30W O-type transformer is used for power supply;
4, I2S input is LVDS level in the form of HDMI interface, compatible with SU-1 interface;

Analog output performance:

Output level (0dBFS):
      PCM: RCA single-ended output is 2V RMS, XLR balanced output is 4V RMS
      DSD: RCA single-ended output is 1.8V RMS, XLR balanced output is 3.6V RMS
Output impedance: 22 ohms (RCA single ended) / 44 ohms (XLR balanced)
Frequency response: 20-20kHz +/-0.2dB
Signal to noise ratio: 125dB
Distortion characteristics:
      THD+N (1kHz, 0dBFS) 0.00025% at fs=44.1Khz (PCM)
      THD+N (1kHz, 0dBFS) 0.00030% at DSD256
Dynamic response (1kHz, -60dBFS) 125dB
Left and right channel separation >125dB

Balanced output noise floor: 2.2uv RMS

Amp balance maximum output power 3480mW@30Ω, 0dBFS
Load power
30Ω 3480mW
75Ω 1640mW
150Ω 920mW
300Ω 440mW
600Ω 220mW

Distortion of the amp balanced output, 0dBFS, fs=44.1Khz (PCM)
75Ω load THD+N -105dB
600Ω load THD+N -110dB


1. Very clean 1K FFT with only 2-5 harmonics, no high harmonics and other spurs


2. Ultra low noise floor, about 2.0uv



3.20-20k frequency response, very straight


4.Excellent distortion performance, THD+N sweep test keeps the whole frequency band below 0.00033%


5. Excellent signal to noise ratio, measured SNR at 125.6dB


6. Rapid dynamic response, DNR reaches 126DB




System compatibility:
1, Windows 7, Windows 8, Windows 10; 32/64 bit, need to install a dedicated driver
2, Native MacOS 10.6 and later, using the system comes with a driver
3, Native Linux with UAC2 compliant kernel, using the system's own driver, (tested on Ubuntu and Daphile systems, based on INTEL X86 platform)
4, Android OS 4.2 and above, the device needs to support OTG function, in general, the Android 5.0 system is supported by default, and the following 5.0 recommendations are used with a dedicated player.


The I2S interface is input using an HDMI socket:
1. LVDS differential signal with a level of 3.3V;
2. The I2S interface is compatible with multiple I2S output signal definitions, and the FPGA has built-in PCM/DSD signal automatic identification algorithm;
3. The DSD ON signal can also be defined by itself. The DSD ON signal can be input to the PIN13, 14, 15, and 16 pins of the socket.
4. The phase of PIN1-3 and PIN7-9 is adjustable, and the user can configure the phase of the two pairs of outputs through one switch.

The SDA-2 can be configured with SW switches to accommodate different I2S standards.


Chassis size and packaging:
The length and width of the chassis: 262MM*220MM*46MM, excluding the height of the feet and the protruding part of the connector behind the chassis.
The weight of a single machine is about 3KG.
The length and width of the carton packaging: 330MM*310MM*110MM.
Shipping package weight: about 3.4KG
Accessories: a USB cable and a power cord

There are two versions of SDA-2, the standard version and the advanced version. The other parts of the two versions are the same. The high version is especially suitable for USB-based users. It is recommended to use USB-based users.

The SDA-2 decoder is a high-performance HiFi-class audio decoding amp preamplifier. It uses XMOS's latest xCORE-200 series chip as the USB Audio solution, and uses the AKM497 of the AKM third-generation DAC as the DA conversion chip, AK4118 as a digital audio input receiver chip, uses STM32 as the control of the whole machine, Xilinx's large-scale FPGA as the processing of the clock system and digital audio stream. The amp part adopts 4-way full balance design, independent discrete class A amp drive circuit; the front stage output adopts analog pre-stage design, which is not the way of digital attenuation affecting sound dynamics; has rich input and output interfaces, including standard USB2 .0 input interface, SPDIF coaxial and AES balanced input, analog XLR balanced output, analog RCA output.

PCM supports up to 384Khz, DSD uses native direct solution technology, supports up to DSD512, and all interfaces support DSD decoding.

The DAC chip adopts AKM's flagship DAC AK4497EQ; the DSD adopts the native direct solution mode. The DSD digital stream does not pass through the internal digital filter and modulator, and works in the NOS mode. The PCM can also choose to work in the NOS mode, which is in line with the HQPlayer design concept. .

SDA-2 is the first decoding amp preamp product we developed, mainly using the following four main technologies:

 1, USB part uses our first generation isolation technology: SCIT technology (Singxer capacitor isolation technique), SCIT technology is a full isolation technology (ground isolation), high-speed signal using 150Mbps isolation chip, low-speed signal using optocoupler isolation It can completely isolate the interference from the PC; the USB version of the high version can basically reach the level of the SU-1 independent digital interface.

 2, source synchronization technology and FPGA shaping technology, re-shaping the isolated I2S signal; thus eliminating the additive jitter caused by the isolation chip;

 3, The self-developed clock system uses a femtosecond crystal oscillator as the local reference clock;

 4, 4 way class A discrete amp circuit, full balanced amplification of 8 chip transistors per route. 



Technical indicators:
Sample rate supported by each input interface:
PCM: 44.1KHz,48KHz,88.2KHz,96KHz,176.4KHz,192KHz,352.8KHz,384KHz

DSD: 2.8 MHz (DSD64) - DoP,native
5.6 MHz (DSD128) - DoP,native
11.2 MHz (DSD256) - DoP,native
22.5792 MHz (DSD512) - native
Bit width: Up to 32 bit over I2S output
                Up to 24 bit over S/PDIF

Electrical standards for each interface:
1, USB input socket is a standard USB-B type female socket, USB power supply range is 4.5V-5.1V;
2, SPDIF interface input standard S / PDIF signal, input impedance is 75 ohms, AES input impedance is 110 ohms;
3, the power input is 115V/ 230V AC, and the internal 30W O-type transformer is used for power supply;
4, I2S input is LVDS level in the form of HDMI interface, compatible with SU-1 interface;

Analog output performance:

Output level (0dBFS):
      PCM: RCA single-ended output is 2V RMS, XLR balanced output is 4V RMS
      DSD: RCA single-ended output is 1.8V RMS, XLR balanced output is 3.6V RMS
Output impedance: 22 ohms (RCA single ended) / 44 ohms (XLR balanced)
Frequency response: 20-20kHz +/-0.2dB
Signal to noise ratio: 125dB
Distortion characteristics:
      THD+N (1kHz, 0dBFS) 0.00025% at fs=44.1Khz (PCM)
      THD+N (1kHz, 0dBFS) 0.00030% at DSD256
Dynamic response (1kHz, -60dBFS) 125dB
Left and right channel separation >125dB

Balanced output noise floor: 2.2uv RMS

Amp balance maximum output power 3480mW@30Ω, 0dBFS
Load power
30Ω 3480mW
75Ω 1640mW
150Ω 920mW
300Ω 440mW
600Ω 220mW

Distortion of the amp balanced output, 0dBFS, fs=44.1Khz (PCM)
75Ω load THD+N -105dB
600Ω load THD+N -110dB


1. Very clean 1K FFT with only 2-5 harmonics, no high harmonics and other spurs


2. Ultra low noise floor, about 2.0uv



3.20-20k frequency response, very straight


4.Excellent distortion performance, THD+N sweep test keeps the whole frequency band below 0.00033%


5. Excellent signal to noise ratio, measured SNR at 125.6dB


6. Rapid dynamic response, DNR reaches 126DB




System compatibility:
1, Windows 7, Windows 8, Windows 10; 32/64 bit, need to install a dedicated driver
2, Native MacOS 10.6 and later, using the system comes with a driver
3, Native Linux with UAC2 compliant kernel, using the system's own driver, (tested on Ubuntu and Daphile systems, based on INTEL X86 platform)
4, Android OS 4.2 and above, the device needs to support OTG function, in general, the Android 5.0 system is supported by default, and the following 5.0 recommendations are used with a dedicated player.


The I2S interface is input using an HDMI socket:
1. LVDS differential signal with a level of 3.3V;
2. The I2S interface is compatible with multiple I2S output signal definitions, and the FPGA has built-in PCM/DSD signal automatic identification algorithm;
3. The DSD ON signal can also be defined by itself. The DSD ON signal can be input to the PIN13, 14, 15, and 16 pins of the socket.
4. The phase of PIN1-3 and PIN7-9 is adjustable, and the user can configure the phase of the two pairs of outputs through one switch.

The SDA-2 can be configured with SW switches to accommodate different I2S standards.


Chassis size and packaging:
The length and width of the chassis: 262MM*220MM*46MM, excluding the height of the feet and the protruding part of the connector behind the chassis.
The weight of a single machine is about 3KG.
The length and width of the carton packaging: 330MM*310MM*110MM.
Shipping package weight: about 3.4KG
Accessories: a USB cable and a power cord

送料

シンセンオーディオは世界中で送料無料です。製品の品質を確保するために、品質管理の実施には1~3営業日をかかってください。

もし受取人は運送を拒否によって拒否された場合、配達できない場合、または送信者に返送された場合、シンセンオーディオは使用された元の支払い方法への払い戻しを処理します。

お客様が注文の再出荷を望む場合は、再配送の送料を請求致します。まだ、お客様は製品コストの最大20%の再出荷手数料を負担する場合があります。



どの配送サービスを使用しますか?

我々と協力している配送業者の数量とサービスを提供する広大なカバレッジエリアを考えると、ある地域の運送時間は他の地域より時間がかかる必要かもしれません。もし、お客様は製品に対して、何かフィードバック、アドバイス、質問がございましなら、下の[お問い合わせ]ボタンからサポートチケットを送信してください。

我々は合理的なコストで可能な限り最高の配送体験をお客様に提供することを目覚まします。このため、常に既存の配送パートナーで送料を下げると交渉し、潜在的な新しい宅配業者を積極的にテストしています。



POボックスまだはAPO/FPO

POボックスまだはAPO/FPOを配達できるかどうかは商品の重さによって異なります。もしある商品の重さは 9 ポンドを超える場合、現在使用した配送サービスの規定、我々はこのアドレスで発送することができません。

ご注文がPOボックスまだはAPO/FPOアドレスへ配送できるかどうかを判断するには、シンセンオーディオサポートにお問い合わせください。



お届け予定日

日本のお客様達にとって:
発送日から3-10営業日

アメリカ大陸のお客様達にとって:
発送日から5-14営業日

ハワイとプエルトリコのお客様にとって:
発送日から2-4週間
海外のお客様は住まいの国に応じて、より長い出荷時間をかかるかもしれません。

カナダ:発送日から1~3週間
オーストラリア、ニュージーランド、ドイツ、フランスと英国:発送日から2~4週間
上記以外の国:発送日から3~6週間

これらは大まかな見積もりであり、郵便局のストライキと悪天候などの不測の事態により出荷が遅れる可能性があることを注意してください。

様々の理由のゆえ、お客様は上記提供した予定時間以内で、製品を受け取らず、輸送中に紛失する可能性があると疑われる場合は、取引ページでサポートチケットを提出してください。我々は配送業者と一緒に注文を調べて致します。必ず運送日から、4ヶ月以内に、あるいは宅配業者が追跡情報をアーカイブする前に、シンセンオーディオサポートに提出してください。



簡単な30日間のリターンポリシー

もしお客様はどんな理由でも注文に不満がある場合は、下記の条件および除外事項に従って、受領日から30日以内にシンセンオーディに返品することができます。



資格条件

下記の条件をご覧ください。すべての条件が満たされない場合、シンセンオーディは返品を断る権利を留保します。返品された商品はすべて、元の箱でそのままにして「完全なUPCコードを含む」。すべての包装材料、ブランクの保証カード、マニュアル、およびアクセサリを含める必要があります。シンセンオーディ元の購入価格のみを返金することができます。送料と手数料は返金できません。



欠陥のあるまたは破損したアイテム

不良品は、同じモデルまたはメーカーの同等のモデルについて当社の裁量により、修理、交換、または払い戻しを行う場合があります。



交換

お住まいの地域によっては、交換された製品がお客様に届く時間は異なる場合があります。交換の処理には3~5営業日かかりますので、ご了承ください。



払い戻しとクレジット

我々は返送した製品を受け取った後、お客様のアカウントをクレジットします。クレジットがアカウントに表示されるのは5~7日をお待ちしてください。ほとんどの場合、最初の購入と同じ方法で払い戻しを行います。 注意してください:元の購入価格のみ返金できます。 輸送費と手数料は払い戻しできません。

お客様は返品した製品の送料責任があります。こちらは送料を返金しません。払い戻しを受けた場合、返送料は払い戻しから差し引かれます。



運送

返品したら、次の場所に製品を返送してください:Rm306, Block A, ChengShiShanHai Center, ZhongXing Road ,Bantian Street, LongGang Zone, Shenzhen, Guangdong, China

このすべて手順を完了しても、まだ払い戻しを受けていない場合は、support@shenzhenaudio.jpを通して我々と連絡してください。